It all happened pretty fast… I think it was the beginning of May when Bob Waldron floated the idea of a BarCamp-like event focused on 3D printing past me, and of course I couldn’t ignore it. I helped set up the web site and did some promotion and sponsor-wrangling, because I figured if he was throwing such an event, I wanted to see it happen so I could go to it. :)
Getting sponsors took a lot of time, but in the end (and I mean very end!) we got what we needed, and were able to cover most of what we wanted for the event. People got fed, Sector67 got a few bucks for use of their space all day, and nothing went wrong… well, almost nothing.
If you attended 3D Printing Camp you owe a big round of applause to Bob Waldron, but you couldn’t give him one on Saturday because he was not there! Despite all the comforts of our modern world, if your plane gets delayed, and you get stuck, you miss things… and Bob missed the event. (Don’t worry, this will just ensure he does it again next year.)
So what did we do? Well, we printed. A lot. And we also had a few sessions related to 3D printing, modeling, security, repairing things, and we just generally got to meet everyone else who is into 3D printing. Remember back when you were the only person you know (not counting online) who was really into something, and if you got to hang out with others who were into the same thing, how awesome that was? Well, yeah, that was it. I think we had about 20 printers, and saw over 60 people come through the door throughout the day. Not a bad turnout at all.
For me one of the highlight was learning more about Sketchup. Kemper Smith led an amazing sessions showing tips & tricks for 3D modeling and I took plenty of notes.
And then there was Tony Warren, who showed up with a partially done RepRap and got it printing by the end of the day. I can certainly attest to the fact that having an unfinished printer is something no on wants, so getting it running is pretty awesome.
The event was pretty laid back, and plenty of people just spent most of the day (and evening!) printing, which is cool. There could have been more sessions, but when you’ve got all those printers in a room, you want to talk about them, and trade tips, and melt some plastic. It’s all good.
As for the RepRaster 5000, it started a little shaky because I could not get my bed up to temperature, then I noticed a ceiling fan above me! I moved and all was well, for a while. I printed a few things, and then I did a print that failed, then the next one failed, and then it was time to just give up. I had managed to knock things out of alignment earlier and I think things just went pear-shaped from there. Too much printing I guess. Once I got home I got everything back to normal, leveled the bed, and it’s back to normal. (It’s always a RepRap adventure somewhere…)