Categories
Uncategorized

Cardboard Knife Switch

For many electronics enthusiasts there is a special place in their heart for knife switches. At least that’s the case for educators I’ve worked with the past decade or so. My guess is it has to do with the simplicity of the knife switch in explaining how a circuit works. Is the circuit opened or is it closed? A knife switch provides a visual demonstration of this like few other switches do nowadays.

Knife switches are not used for most modern day circuits as they have been replaced by switches that are safer at high voltages, but since we work with low voltage circuits in educational settings this DIY Cardboard Knife Switch is perfect.

I’ve talked to a few educators and heard complaints about how expensive the old style knife switches are. (You can buy new “cheap” plastic versions for about $2 per switch, but the ceramic ones are often $10 or more.) I thought I’d lower the curve by creating a cheap DIY version that can be made with Maker Tape.

There’s a template that can be used to make one from cardboard or other material that’s got some rigidity and thickness to it. Cardboard is great, foamcore could work, cereal boxes are too thin. The template expects some cardboard and a way to cut it, which could be an X-ACTO knife, some scissors, a razor blade, or even a laser cutter.

Once you have your four pieces you attach some conductive Maker Tape, poke some holes for the brass fasteners to go through, and you’re nearly done!

Assemble the four pieces using the brass fasteners to hold them together and to act as a pivot point for the lever and you’ve got a knife switch. It may help to pinch the top of the two outside pieces a bit narrower so the knife is guided into place a bit better. (You’ll see this tip and more in the PDF guide.)

Besides the Brown Dog Gadgets Project Database, you can also find this project on Instructables.

Leave a Reply

Your email address will not be published. Required fields are marked *