Categories
Uncategorized

Star-Blinken LED Testing

LED Testing

I’ve been testing some flashing red LEDs with CR2032 batteries to see how long they’ll last. My first test confirmed that they’ll definitely go 48 hours, which is good, because they’ll have to last the duration of Maker Faire.

Here are my completely unscientific notes taken this week after starting a new test on Monday night.

Day/Time Status
Monday 11pm Extremely Bright
Tuesday 11pm Extremely Bright
Wednesday 10pm Very Bright
Thursday 11pm Somewhat Bright
Friday 6pm Not Quite Bright
Saturday 6pm Dim
Sunday 6pm Very Dim

I think we can expect three solid days of bright LEDs, and maybe another day or two of acceptably bright LEDs. Working backwards, this means that if we want the LEDs still going strong by 6pm on Sunday, we need to start getting them in place by Thursday night.

Hmmm, Thursday night is when I teach class. Perhaps I can just make this into a group project for my class, or maybe DECODE can lend a hand…

LED

This is just one post in a series, check out the other posts as well:

Categories
Uncategorized

Star-Blinken

Star-Blinken

I’m still gathering material, but this is a project I’ve got planned for the Dark Room at Maker Faire Milwaukee that is titled “Star-Blinken”. (Enjoy the conceptual rendering above.)

I still need to construct the frame (probably from scrap wood at Milwaukee Makerspace) but there is a sheet of steel about 36″ x 29″ that will be covered in flashing LEDs each powered by its own battery and attached with a binder clip and a magnet.

I’ve seen a single LED blink, and even a few blink at once, but this will consist of over 200 LEDs all blinking at once, and at different rates… Star-Blinken!

This is just one post in a series, check out the other posts as well:

Categories
Uncategorized

Review: GE reveal LED Light Bulb

GE reveal Light Bulb

I received a GE reveal® LED Light Bulb and was asked to write about it. Besides being given the light bulb, I was not compensated in any other way. Also, I’m sort of a lighting nerd. I use lighting at work for photo and video production, and I’m very particular about much of the lighting in my home and office.

If you want to see some of the typical comparisons, check out the GE reveal® Lighting page. The info I’ll provide below is a bit different.

Compact Fluorescent Light Bulb

This is a standard compact florescent light bulb. I sort of hate CFL bulbs. I find the light they produce quite terrible, and the big clunky base of the bulb is annoying. From a design standpoint, I find the spiral ridiculous. I do like the energy saving potential of the CFL bulbs, and we do use some around the house, but overall I hate them.

Standard Light Bulb

This is a standard incandescent bulb. I love these bulbs. They tend to produce a nice quality light, and they are cheap, and the design is beautiful. When I think of a light bulb, this is what I picture. Of course, these are quickly becoming illegal (sort of) and being phased out. Sadly, at some point in the future, you won’t be able to buy incandescent bulbs in the United States anymore. Sadness!

GE reveal LED Light Bulb

This is the GE reveal Bulb, which, design-wise, is close to an incandescent bulb, which is nice, especially if you have shades that go directly on the bulb. (Yes, older lamp shades did have a metal clampy thing that went right on the bulb. I still have some of those lamp shades.) One of the benefits of this bulb is that it matches the physical shape and size of the old incandescent bulbs. That’s a big improvement over the CFL bulbs.

Lighting Difference

As for the quality of light, it’s a pretty nice light. I found it to be just a little cooler than the incandescent bulb… in a good way. I definitely like the light it produces. The LED bulb gives off a great light! Slightly better than the incandescent, and much better than the CFL.

One little annoying thing about the design is that you only get light from half of the bulb. I know this is due to having to shove all the electronics into the other half of the bulb, but I can see this causing issues in some situations where you actually do want light spilling out in every direction.

Old Time Light Bulb

I decided to put the bulb into place in my painting room where I’ve been using an incandescent bulb. Now, our house is old, and the light sockets are old, and this old incandescent bulb has been doing the job fine, probably for years and years, but…

GE reveal LED Light Bulb

When I put in the GE reveal Bulb, it did not work. I tried a few times. I also pushed the bulb up against the fixture, and no luck. It’s worth noting that the socket is a bit wobbly, but the LED bulb just did not work. Maybe there are some sockets it won’t work in?

I should also note that I weighed the three bulbs, because I was curious about the weight. The compact fluorescent bulb (the largest I have in the house) weighed in at 6.4 ounces. The good old incandescent bulb was 0.99 ounces. (Yes, it was less than an ounce!) The GE reveal LED bulb was a whopping 7.3 ounces. That’s a heavy bulb! I can see this causing some issues if you’ve got a lamp that may already be top-heavy. I guess if we’re moving to a world were we have to convert high-voltage AC power to low-voltage DC power in every bulb, that may be the price we pay.

GE reveal LED Light Bulb

I moved the GE Reval bulb to another socket and it worked fine. This light also had a metal shade on it which would normally reflect light down, but since the GE reveal bulb doesn’t really shine light up due to the half-bulb design, the shade probably doesn’t do much. But hey, the bulb worked… that’s good!

GE reveal LED Light Bulb

The good news is, the GE reveal bulb is suitable for damp locations, though it does warn that it is not for use in totally enclosed luminaires. This will limit where you can use this bulb. Even though incandescent bulbs can product a lot of heat, they can also stand a lot of heat, like inside your oven! The electronics used in an LED bulb are sensitive to heat, and may not survive being in an enclosed fixture. (And yeah, never use one in an oven!)

There’s one more feature of the GE reveal bulb I’m really excited about… it’s dimmable! Yes, there are dimmable CFL bulbs, but none of the ones I have are dimmable, and the ones that are seem to be pricey. Incandescent bulbs excel when it comes to dimming. I put the GE reveal bulb in our bathroom fixture and it did indeed dim. It did not go as dim as my incandescent bulbs, but hey, it did work. I then tested it in an X10 controlled lamp, and the results were much better, though there did seem to be a slight flicker at the lowest setting.

GE is marketing this bulb to people who want to have beautiful light in their home (or elsewhere) to “reveal” the decor and surroundings, and for that, I’d say this bulb does the job. It provides a lovely light, and is well designed. A quick search online revealed this bulb to cost about $20, which is ten times what you might pay for an incandescent bulb. Of course the LED bulb should be more energy efficient, and should last much longer. In theory.

So that’s my review of the GE reveal® Light Bulb. Pretty much everything in this review had to do with testing, evaluation, and my own opinion. Now that’s all of that is out of the way, I’ll put the bulb into place and give a real-world test for a while, and then if I have new insights, I’ll share those as well.