posts tagged with the keyword ‘torx’

2003.04.08

When repairing a PowerBook G3 (Wallstreet) you’ll need two Torx screwdrivers, a size 8 and a size 6. If you’re lucky, you’ll find these at your local hardware store. If you’re unlucky – or cheap – this might be more difficult.

I managed to get the Torx 6 at the local hardware store, no problem. They also had a Torx 8 bit, with the security hole in it, which makes it cost more, and allows you to remove Torx screws of the size 8 variety with a small pin in the hole on the top. Yeah, so anyway, I bought that one. The bit worked OK until I had to remove some screws that are way inside, that require you use a Torx 8 with long skinny shaft – which means the damn bit would not fit. This halted repairs a bit.

So I happen to be at Home Depot, they have a Torx set but it’s $20, which for someone who is cheap, is quite the deterrent. I ended up calling another hardware store, they had nothing, I then called Radio Shack, and they did have a tool with fold out Torx bits, but they said it was $16, and it sounded cheap and I wasn’t sure it would work, plus I figured if I was gonna spend that much I’d spend $20 for a nice set.

So at this point I continue to hope I’ll find a single Torx 8 screwdriver, and if I don’t I’ll end up spending $20 for the nice set, even though I’ve already spent $7 for the bit and the Torx 6.

This demonstrate the frustration of everyday life I must endure…

(I’ll leave it up to you to determine if that last statement was sarcasm or not…)

|


buy the button:

Buy The Button