Categories
Uncategorized

I changed an ebike tire!

There’s a first time for…

Changing an ebike tire

Yes, the title is a little cheeky. Back in 2024 I changed a bike tire and the post is slightly silly. I mean, I’ve changed tires before in my life, but it had been a while. As a cyclist I know I should know more bike maintenance, but sometimes it takes me a while. I’ve probably changed a few more tires since then. (But I also switched to Schwalbe tires!)

About a month ago I got a new studded front tire for my bike, along with a spare rim. I tried to assemble it all, but I gave up and had Bigfoot do it for me because Brian is awesome like that. He charged me a small fee and gave me a bunch of tips. I think the tricky part for me was that I’ve only done skinny tires before not wider tires.

So when I was about to leave work on Friday I noticed I had a flat tire. In the rear. Argh. I ended up getting a ride home and figure I would deal with it over the weekend. I could bug Brian again, or try Eriks’s or Wheel & Sprocket, but with a whole Saturday ahead of me I decided to try it myself. I started by watching a bunch of videos about changing an ebike rear tire.

Oh, when I changed my Trek rear tire I could do it without a bike stand. It wasn’t fun, but it worked. I then cobbled together a crappy DIY PVC stand, which is fine for light bikes but not the heavy ebike.

I had to remove a bunch of my handlebar stuff (light, camera mount, bell, bag) and then loosen up the display to rotate it out of the way, and the flip the bike over. It wasn’t fun, but it worked.

Changing an ebike tire

Once I had the rear wheel off I carefully rotated it while using my bike light to look for damage… which was silly, because after I rotated it about half way I found a giant staple sticking out of the tire. I removed it easily. From there I did the “inflate tube, rotate through a tub of water” trick to find the hole. It was tiny, but enough to cause a flat. I used a Slime patch to fix it and then confirmed it was air-tight.

Changing an ebike tire

I did not remove the tire though, and just left it on the rim. (Another trick I had read about.) Since I was able to get the tube out and leave the tire (mostly) on the rim it was just a matter of reversing the process to get it back together. I then inflated the tire and let it sit for a few hours to make sure it was good.

So many hours after starting the process I had the rear wheel back on the bike. There is one additional cable due to the hub motor, but otherwise it wasn’t much different than an acoustic bike. I’m glad I’ve done it though since it’ll be easy if (when?) I have to do it again.

Oh, there’s one more thing…

I don’t know if it’s due to the bike being upside down for so long, but when I was done and did a little test ride the rear brake did not work! Well, it sort of worked, I just had to squeeze it all the way. So a “spongy” brake is what I had. I then did a lot of reading about bleeding hydraulic brakes, what is need, how to do it, etc…

But I found a trick, well, a suggestion, really.

I pulled the brake lever all the way, and the zip tied it in place, and waited. The next day I removed the zip tie and all was good! Brake back to normal. Whew! But hey, at least I now know all about bleeding brakes, in case I need to actually do it in the future.


Note: This post may contain Affiliate Links. Read More.

Leave a Reply

Your email address will not be published. Required fields are marked *