Tag: 3dprinting

Categories
Uncategorized

3D Printing Camp

3DPCWI

For me, this story starts back in October 2011 at BarCampMilwaukee6. A few of us stayed up the entire night with a MakerBot CupCake printing things. I’d pretty much caught the 3D printing bug at that point.

So when Bob Waldron pitched the idea of “3DPrintingCamp” I was interested. I helped launch the web site, and have contributed (at little bit) to organizing and attempting to get sponsors (I’ve got none yet) there’s still a lot of work to do before July 21st, 2012.

Yes, the date is July 21st, 2012. The location is Sector67 in Madison, Wisconsin. All the other details are at 3dprintingcampwi.com.

And what is 3DPrintingCamp? Well, it’s a participant-driven unconference focused on the emerging technology of 3D printing. You may be interested in 3D printing for personal fabrication of functional parts, or maybe you want to create beautiful objects that would fit in the “art” category. Perhaps you want to produce organs to save lives. The people involved in this event believe that 3D printing will change the world.

If this is all a bit above your head, that’s OK. Join us and learn about 3D printing technology. Find out what a spool of plastic and an open source bot can do for you.

Oh, this event is FREE, but you do need to register. As of my writing this we’ve got 41 people registered and we’re limited to 125 people max, so sign up now.

And if you’re interested in sponsoring, we could really use the help to make this event even more awesome… thanks!

Categories
Uncategorized

The Magic Whistle

Whistle #1

One of the first things I printed on the RepRaster 5000 was a whistle, you know, in case there was an emergency soccer game or something. To my amazement I took it off the bed and blew into it and it worked! I had just printed a fully functional whistle, and thusly declared The Future™ to be here.

Whistle #1 was a little rough. It worked, but it didn’t look very beautiful. (Well, beautiful by 3D printing with plastic filament standards.) After some tweaking and calibrating I printed Whistle #2 and it sounded just like Whistle #1 but looked a little better. An improvement!

Whistle #2

That brings us to Whistle #3. As any good RepRapper knows, you can’t just leave well enough alone, and if you’re happy with your slicing settings, you’re doing something wrong. With this in mind I set about changing all the numbers in Slic3r and then attempted to print another whistle.

When I popped Whistle #3 off the bed and blew into it… nothing. Well, not nothing, just the sound of air, minus the sweet whistling sound. I recently told my kids that failure is just a part of the learning process, so I wasn’t ready to quit.

I got a knife and made sure to cut out any stray filament from the bridging during printing. Still no go. I decided to rinse the whistle out thinking maybe there were bits of plastic inside. (Yeah, at this point I was just grasping.) Lo and behold, with the water inside my whistle totally worked! There’s a fine line between science and magic, and I’ll get to that in a minute.

Whistle #3

I’m no Whistlologist, but my first guess was that the volume of air inside the whistle was too much and preventing it from operating properly, perhaps due to the lower infill I used when printing. I ended up being totally wrong about this. It had nothing to do with the volume of air (duh!) but everything to do with where the air was going!

It seems that the crappy print actually left some gaps in the top of the object, which happened to be the left side of the whistle. By putting water inside it was temporarily filling the holes. I could get the same effect by just giving a slight squeeze on the left side of the whistle with my thumb to block the airflow. Zing! Magic whistle. (Magic is just science you don’t understand, right?)

I then hatched a plan to trick the kids by having them try to blow into it, and then telling them they were doing it wrong, and then showing them how it’s done. I wonder if they’d see me squeezing the side or not.

Now I’m left thinking I need to design a new whistle with intentional holes. Anyway, that’s the sort of crazy stuff I do. You’re welcome!

Categories
Uncategorized

RepRap Report

RepRap

Here’s a RepRap update, which I plan to do every now and then to track the progress of the RepRaster 5000. (Yeah, that’s the name of it. At least until I come up with a better one.)

The RepRaster 5000 has been fully operational for about a month now, and I have managed to make a few things in that time. Most of my prints have come out okay… not great, but okay.

Pronterface

I’m using Slic3r and a pre-compiled version of Pronterface on Mac OS X 10.6.8. I’ve had one or two STL files that had some issues with Slic3r, but besides that it’s been a fairly solid setup. I’m still using Sketchup for some 3D modeling, and OpenSCAD continues to confuse me.

Slic3r

My first prints were on a sheet of glass taped down to my heated PCB. They turned out pretty bad. Because of the way the PCB was attached to the platform I couldn’t clip the glass tightly into place. Oh, the PCB was also mounted flat(ish) to the wooden platform. I ended up raising up the PCB above the wooden platform, thinking it would help it heat up faster (it seems to) and I’d also then be able to clip the glass to the PCB. This is way better. Easier to work with, for sure.

So now I’ve got the PCB above the wood (spaced with a few nuts and washers) and the glass attached to the PCB with bulldog (AKA “binder”) clips. My first prints on plain glass were hit and miss, and the ratio was not improving. I tried ABS slurry (which is acetone with some filament dissolved in it) but that was messy and still didn’t seem to work that well. I ended up putting Kapton tape on the glass, and then just using nail polish remover to clean the Kapton well before printing. (I’d prefer to use the nail polish remover over the acetone if possible, since it’s less smelly.) Finally, I was getting really good adhesion! (I’m doing two skirt loops 6mm from the print.)

Leveling Nut

The one thing that really helped printing (so far) was leveling the bed, which was completely impossible at first. With just the nuts, there was no way in heck I was going to get things level. Then I found the Parametric Thumbwheel, printed four of them, and at last… a level bed! Again, one of the great things about a RepRap is that it can (often) print its own upgrades. I’ve got my eye on a few other items that might make things better/easier/faster.

I’m at a point now where I feel like I can print things, and while they aren’t the best quality yet, that will change in the future, with more and more tweaking. I’m looking forward to sharing tips & tricks at the Milwaukee 3D Printing Meetup happening July 1st, 2012, and 3D Printing Camp on July 21st, 2012. If you’re at all interested in this stuff, either event (or both!) would be a great introduction.

Categories
Uncategorized

MKE3DP – 3D Printer Fans Unite!

MKE3DP

As you may know, I finished my RepRap recently. But here’s the thing, you never really finish a RepRap. It’s a beast in need of endless tweaking. So yeah, it’s a never-ending project (if you want it to be) and I’m okay with that. I mean, once you get to the point that it works, you can start using it to upgrade itself. How many tools can do that!?

Of course you can actually make useful things, functional things, or just pretty things. There’s a lot a 3D Printer can do. I’ve only been at it for less than a year and I’ve still got a lot to learn.

So anyway, yeah, I’m really enjoying this 3D Printing stuff… so I figured, why not share it with others? So join us for the first Milwaukee 3D Printing Meetup! We’ll be meeting on Sunday, July 1st, 2012 at 1:00pm. We won’t be at our space because we’ve partnered with our friends at UWM for this one! Show up at UWM’s Kenilworth Square East Building, 3rd Floor; Room 368 on 1925 E. Kenilworth Place.

If you’ve got a 3D Printer, bring it, or just show up and learn about them. If things go well and there’s interest, maybe we’ll turn it into a regularly scheduled meeting.

(More info? It’s also on the Milwaukee Makerspace site and you can RSVP on Facebook if you want to see who else will be there.)

Categories
Uncategorized

Maker Business – I Heart Robotics

Plastic

In the spirit of my “Maker Business” posts (like The Real Costs and Lessons Learned) I’d like to point you at this post from I Heart Robotics titled Business Plan: 3D manufacturing. If you haven’t read it, go read it. Then come back here. I’ll wait.

Are you back? Good! Let’s go…

This is my favorite post of the week… and it’s only Thursday! For anyone wanting to get into a maker-related business, it’s a must-read.

The funny thing is, I’d seen one of these TriK Tripod Adapters for the Kinect before, because Mike printed it at Milwaukee Makerspace one day. (You could say I have an interest in various camera related mounting technology.) Yeah, that’s right, they guys who were selling this item also gave away the design for free to anyone who wanted it. Insane you say? The world I want to live in, I say…

This is an area I see open source hardware similar to open source software. Once a problem is solved, why not share the solution with everyone else, for free? You’re welcome to sell the software (or hardware) all you like, and letting other use it for their own use is a great side effect that costs you nothing. (Some could argue it costs you in potential revenue, but I won’t argue that right now.) It’s also worth noting that I Heart Robotics licenses the item with an Attribution – Non-Commercial – Share Alike license. For those unfamiliar with Creative Commons, a simple explanation would be that as long as you don’t make money by selling it, you can go nuts and make (and give away) as many of them as your 3D Printer can make.

This breakdown of costs is also worth studying.

TriK Tripod Adapter Costs 

 $0.384     8 grams Raw ABS Plastic
 $0.0182    1/4-20 Nut
 $0.222     Qty 4 Plastic thread forming screws 
 $0.124     2 x 1 1⁄4 x 3" Kraft Reverse Tuck Carton
 $0.015     2 x 2" White Laser Label
 $0.044     3 x 5" 2 Mil White Block Reclosable Poly Bag
~$3.75      NRE - Non-Reoccuring Engineering Costs
~$0.50      Labor - Push button, remove part, repeat
~$8.34      Printer operating cost

Total Cost $13.40/part

What can we learn from these numbers? Plenty! Some of these items are things you don’t really think about, like labor or equipment operating costs. For instance, I use a drill press in my basement to manufacture things. I don’t really add in the cost to run it for a few minutes per unit, but maybe I should. I also run a fan in my spray booth, and that uses electricity. The numbers might be negligible, but they do exist. (Oh, we also learn that Uline is awesome.) Update! Uline sucks. They helped fund an insurrection. I stopped using them years ago. See Also: refuseuline.com

Since I’ve been dealing with numbers like these in the past few months I’ve become a little more aware of people who complain about such things. I can see someone who owns their own 3D Printer saying “They want $20 for that!? It’s like 5 cents worth of plastic!” and while it may be just 5 cents worth of plastic (or less) there’s a lot of other costs involved. If you have the power to make one on your own, go for it! Either design one and make it, or in this case, download it and print it. I’ve learned that even if you carefully outline exactly how to do something and publish it on the Internet, there are still people who will (gladly) just pay you to do it all for them and then ship it to them, and for that I am grateful.