Categories
Uncategorized

Make It Your Own

The Sonic Titan

Years ago when I was really active at the Milwaukee Makerspace a member there would ask me about the projects I made, and how I came up with ideas for them. Well, I’ve always been a weirdo who thinks about weird things, so I’d usually get some idea and try things and occasionally it would become a project. Sometimes they were neat, sometimes they were dumb, sometimes other people thought they were interesting, and sometimes I was the only one who cared about it!

So this Maker said to me “I had an idea for building something but I looked online and someone has already made one.” and they seemed genuinely defeated.

I think this Maker’s goal was to get recognition, maybe via Hackaday (which is a double-edged sword) or… I don’t know. But they seemed upset that someone else did something they wanted to do.

I had some advice, which I’ll share here:

“Just make the thing you want to make. Who cares if someone else has made their own version. Make your own. It will be yours, it might be different. You might made different choices, in fact, you can make different choices. I typically don’t bother looking to see if someone else already built the thing I am going to build, as mine will be unique because it was made by me.”

Look, people have been on this planet a long time, and have created a lot of things… some would say nothing truly “new” has been created in decades, or centuries, and everything at this point is just rehashing or reimagining what has come before.

So just make your own damn thing, and make it yours.

Categories
Uncategorized

Bambu Lab A1 mini 3D Printer

Back in June 2024 I got a Bambu Lab A1 mini to add to the printers in the shop. The Bambu Lab A1 mini 3D Printer is a tiny little thing! And it’s not my first mini printer. Back in 2021 I got a Prusa MINI+ and when I did I pretty much stopped using the old Monoprice Maker Select Plus except for larger prints because the quality was so good on the Prusa.

I liked the Bambu Lab P1S I got in October 2023 so much that I convinced Josh at Brown Dog Gadgets to replace our Ender-3 S1 printers with a few, so he got four of them.

And since I was having great success with the P1S it made the A1 mini look nice, and I saw it as a “replacement” for the Prusa MINI+… oh, and Bambu Lab was having a sale, and oh, I actually had a $50 gift card to apply to the purchase so I got it for $175 USD. Killer Deal!

I did not get the AMS unit. I’ve got one for the P1S and do any multi-color stuff on that machine. There are a few things that aren’t amazing about the A1 mini, like the camera and the light, and of course the smaller print area, but the print quality is extremely nice for a bed slinger. It appears to print higher quality prints than the Prusa MINI+ did, even when it was brand new. The A1 mini came ready to print… no assembly required.

The screen is a little small (though it’s much better than the old “car stereo” style screen on the P1S) and I use a stylus for pressing the buttons on the screen because my fingers are not tiny because I am a fully grown adult man.

I mostly use the A1 mini for printing printing plates (yes, plates!) or other small prints if the P1S is busy. Honestly if you want a small beginner printer the A1 mini fits the bill pretty well.

Categories
Uncategorized

Giant LED Cube

You know when you mean to do something and then forgot and a few years pass? Okay then… I wrote the post Designing a Giant LED Cube in 2018 and hey, it’s time for the next post!

Anyway, I built what was (jokingly) call the “World’s Largest LED Cube!” but eventually settled on “Giant LED Cube” and here are some photos and videos showing it off. And yes, since it uses “LED Bulbs” I consider it an LED Cube. It’s not technically a “cube” because it’s a bit taller in the Z direction but hey, close enough!

To connect all the PCV pipes together I got eight 3-Way Elbows, twelve 4-Way Tees, eight 5-Way Crosses… and 27 Elbows, 28 Tees and a ton of PVC pipe, obviously!

The LED Cube was shown at Maker Faire Milwaukee in 2018 and 2019, as well as the Fall Experiment in 2019, The Elkhorn Mini Maker Faire in 2019, and the Madison Mini Maker Faire in 2019. Sadly at the end of 2019 the department I worked for got shut down and I was left with just the control box, the electronics, and the PVC connectors, as I didn’t have space for all the PVC pipes, though I did get some (not all) of them later on and thought about building a smaller version of the cube but life stuff happened in 2020. Sigh…

While this was a large sculpture (the largest I ever worked on) it was fairly easy to put up and take down, and could fit in a reasonably sized vehicle like a van, small truck, or even a Honda Element. the 5 foot pieces of PVC pipe did take up some room but 5 feet isn’t too unwieldy to deal with. All the other stuff fit in a few bins.


Note: This post may contain Affiliate Links. Read More.

Categories
Uncategorized

I changed a bike tire!

Hey, I changed a flat tire! I got a flat about six weeks ago and I ended up taking the bike into the shop and they got it all fixed up the same day and I grabbed an extra tube in case it happened again… well, it happened again. I figured I should (re)learn how to change a bike tire, so that’s what I did.

It’s been, oh, probably 30 years since I changed a bike tire, and that was on my Dumpster Bike, so I did a quick search, ignored the AI results, and found this Removing Rear Wheels Is Easy! post from a bike shop in London. Cheers!

My main concern was that I know how to change a tire (as in, remove the tires, replace inner tube, put tire back on) but the “removing rear wheel from bike” part was where I was a little rusty.

Anyway I got the wheel off, got the tire off, put some air in the old tube, confirmed a leak, then inspected the tire to see if there was any visible damage, any bits of metal, etc. The last time I got a flat I could definitely see a large metal staple. This time, upon close inspection… I found nothing. Some tiny rocks embedded in the tire, but nothing that poked through. Also, the hole in the tube was pretty tiny, so maybe it was just a failed tube?

(Note: The photo of the stangely distorted tube may be the result of messing with trying to fill it on the previous day and having it pop out between the rim and tire. Don’t ask.)

I got it all back together, filled the tube, and did a test ride in the alley. Oh, notice anything? In my haste to test it I forgot to reconnect my rear brake! Argh! Anyway, I got that back in place and all was well. It took about 20 minutes total including the test ride and fixing the rear brakes. Not bad for my first attempt.

The one pain in the ass was doing it all without a bike stand. So I thought to myself “Hey, could I build one from PCV pipe?” mainly because I have a shit-ton of PVC pipe connectors from a past project. Well, it looks like people have made PVC bike stands, so I’ve added making one to my list of things to do.


Note: This post may contain Affiliate Links. Read More.

Categories
Uncategorized

Pete’s Prints at Maker Faire Milwaukee

Back in 2015 I became a Producer for Maker Faire Milwaukee, and helped put on the Faire for the next four years until 2019. Life changed a lot in 2020 and I did take part in the event as a Maker in 2021 and 2022, but life got a little upset in 2023 so I just attended as an Attendee. Well, it’s 2024 and I’m back as a Maker!

So come on down to the 2024 Edition of Maker Faire Milwaukee happening on November 23rd & 24th November 2nd & 3rd at Discovery World and see Pete’s Prints.

HEY! So yes, the date has changed! It was November 23rd & 24th but is now November 2nd & 3rd, 2024.

I will be there to show off my unique relief printmaking process. If you missed it, I designed and 3D printed my own mould & deckle and I make my own paper, mostly from recycled junk mail and other scraps of paper, and I then 3D print printing plates and print with them (onto the handmade paper) using a DIY printing press I assembled. Oh, I also 3D print frames for the prints.

Yeah, that’s a lot, so here’s a list of all of the posts I’ve written about my printmaking endeavors over the last year or so:

Whew! If you read all of those (or even just some of them) you might have some insight into my process. If not, feel free to come to Maker Faire Milwaukee and ask some questions!