Categories
Uncategorized

The (Feed Your Soul) NoiseBowl

noise-bowl-0353

Back in October of 2017 Marc Ownley (member of Milwaukee Makerspace and amazing metal artist) brought a bunch of wooden bowls to the makerspace and asked members if they wanted to create something unique for the Feed Your Soul event that was happening in November. I took one not knowing what I might do, but it sounded like a fun challenge.

fys-2017

I started to stain the bowl, and had an idea for layering stain using masks, but I just wasn’t feeling it. Then around the middle of October I headed out to Maker Faire Orlando and was gone nearly a week, so when I returned it finally hit me. I had built so many noisemakers for Maker Faire Milwaukee, I thought it appropriate to build one more. And the NoiseBowl was born!

noise-bowl-0357

I did just a bit more staining then a coat of polyurethane, and moved on to the wiring. The sounds this one makes is similar to NoiseMaker VII, although I did add a small amp to kick up the volume a bit. There are 3D printed parts (like NoiseMaker VII has) but in black this time. The speaker legs are borrowed from NoiseMaker IV.

noise-bowl-0358

It is similar to NoiseMaker VII in a lot of ways, which is fine, because that’s one of my favorites in the series.

noise-bowl-0360

At the Feed Your Soul event they hold an auction and people bid on the bowls, with all of the proceeds going to feed the hungry in southeastern Wisconsin, which is awesome. I had a lot of fun making this, and I hope whoever got it appreciates it and finds it to be fun, but more importantly, we were able to help people in need.

noise-bowl-0364

It’s rare that my art goes out into the world and doesn’t return with me. Typically I stick things in a box in the basement or eventually dismantle them (we’ve only got so much basement space!) I don’t know who has the NoiseBowl, but I hope they’re enjoying the noise it makes. Hopefully I can build something again next year.

Categories
Uncategorized

Two Square Feet of Art

M

Our story of the M begins when my friend Tiffany from While You Were Out Pet Sitting Service mentioned she was doing a charity event called Red, White & Black: 100 Square Feet of Art. If you remember the old “250 Square Feet of Art” event the Eisner used to hold (and I took part in) it’s like that. Artists create 12″x12″ boards, and they get auctioned off. So I volunteered.

I started with this letter M, in the typeface Umbra BT. I liked the 3D quality of it, and since I also love using the laser cutter at Milwaukee Makerspace, I had a plan.

M

The Photoshop mock-up was just an idea, so I re-created the letter M in Inkscape to prepare it to be laser cut. You’ll notice right now that the M in the first image and second image don’t match exactly. (I wish I had noticed at the time!)

I cut the shapes out of 1/8″ Baltic Birch plywood. My plan was to cut one board like this, and I’d the use the pieces to attach to another board, and the template piece as an assembly guide. Good idea, right? Right.

M

My next thought was, “Why waste full boards to get more pieces?” and I arranged the pieces to minimize waste. This works well for general assembly of things, but for art, maybe not so much. The pieces cut fine, but I did have to deal with kerfs, some scorching, the grain of the wood, etc. None of those things were huge deals, but they’re things to be aware of in the future.

M

At this point it was just a matter of assembly. A bit of glue, and bit of wood stain, what could go wrong?

M

There was a lot of time spent with the glue and the clamps. Well, most of the time was spent waiting for glue to dry. I obviously need another 20 spring clamps. Just for fun, this is about the time I got sick and had a work overload, so I started getting really concerned about completing this on time. (It gets worse.)

M

Here it is done! I call it “M1” by the way. An “M” for “Milwaukee” or “Mike” or “Mary” or whatever you like… or you could flip it over and make it a “W” for “Wisconsin”, etc.

I also had a nightmare time with the wood stain, though I managed to recover that by changing the piece. I learned everything I’d forgotten about staining wood in the 20 years since I’ve last done it.

M

Here’s a side view of M1 showing the dimensionality of the piece. The M is about 3/8″ thick.

M

But wait, what’s that? I still have that leftover piece that I used as an assembly template! Hmmm…

M

Yeah, here’s “M2” as it were. I figured that a perfectly nice piece of laser cut wood should not go to waste, so I came up with another idea. I reversed the color scheme of the stains on the two pieces of wood, attached the front piece to a back piece, and blammo! Another wonderful(?) piece of laser cut art.

M

I think I may actually like M2 better than M1, maybe just because of the process that created it, but hey, you be the judge, or the critic, or the bidder, or whatever. Cheers!