Categories
Uncategorized

Scrabble Coasters

Laser-etched coasters

I finally finished these Scrabble coasters I’ve been working on forever. There were so many issues with this project, I’m calling these beta and plan to completely redo them. This is all fine though, as I spent some time this weekend explaining to the kids that screwing up and doing things wrong is all part of learning. Fail faster and all that. I’m pretty sure that the next version of these coasters will not have all the problems that this version had.

Laser-cut coasters

So what were the problems? Well, for one thing, I’ve really got to remember to sand the wood first! Yeah, like, before I etch it. Not a huge deal, but I think they’d look better if I had sanded first. As for the backing, I first thought about using cork, but decided against it but then I had to use cork to cover up the mistake on the back of using the wrong wood stain. The cork was not easy to cut, and there are some rough edges. I used a lot of X-ACTO blades in the process, but I think this cork may have been aged a bit too long. As for the wood stain, the wrong stain nearly torpedoed this project. Lesson learned? Test the stain on scrap wood. Besides all that, I think they turned out pretty good.

Oh, while I was using the laser cutter at Milwaukee Makerspace Shane commented that the letters looked a little rough. I had to explain that I didn’t just type up the letters in CorelDraw, I actually scanned real Scrabble tiles, as I wanted these to be authentic replicas, only much larger. I probably didn’t get the color quite right, but again, I’d like to redo the whole project. A deeper/darker etch may be in order next time, and I’ve got another idea for the backing/feet.

Glass on coaster

But do they work? Yes! Surprisingly enough, the glass did not tip over or go flying off the coaster, though honestly I think gravity had a lot more to do with it than my skills at making things. Still, I’ll count it as a success. :)

Categories
Uncategorized

RepRap Report

RepRap

Here’s a RepRap update, which I plan to do every now and then to track the progress of the RepRaster 5000. (Yeah, that’s the name of it. At least until I come up with a better one.)

The RepRaster 5000 has been fully operational for about a month now, and I have managed to make a few things in that time. Most of my prints have come out okay… not great, but okay.

Pronterface

I’m using Slic3r and a pre-compiled version of Pronterface on Mac OS X 10.6.8. I’ve had one or two STL files that had some issues with Slic3r, but besides that it’s been a fairly solid setup. I’m still using Sketchup for some 3D modeling, and OpenSCAD continues to confuse me.

Slic3r

My first prints were on a sheet of glass taped down to my heated PCB. They turned out pretty bad. Because of the way the PCB was attached to the platform I couldn’t clip the glass tightly into place. Oh, the PCB was also mounted flat(ish) to the wooden platform. I ended up raising up the PCB above the wooden platform, thinking it would help it heat up faster (it seems to) and I’d also then be able to clip the glass to the PCB. This is way better. Easier to work with, for sure.

So now I’ve got the PCB above the wood (spaced with a few nuts and washers) and the glass attached to the PCB with bulldog (AKA “binder”) clips. My first prints on plain glass were hit and miss, and the ratio was not improving. I tried ABS slurry (which is acetone with some filament dissolved in it) but that was messy and still didn’t seem to work that well. I ended up putting Kapton tape on the glass, and then just using nail polish remover to clean the Kapton well before printing. (I’d prefer to use the nail polish remover over the acetone if possible, since it’s less smelly.) Finally, I was getting really good adhesion! (I’m doing two skirt loops 6mm from the print.)

Leveling Nut

The one thing that really helped printing (so far) was leveling the bed, which was completely impossible at first. With just the nuts, there was no way in heck I was going to get things level. Then I found the Parametric Thumbwheel, printed four of them, and at last… a level bed! Again, one of the great things about a RepRap is that it can (often) print its own upgrades. I’ve got my eye on a few other items that might make things better/easier/faster.

I’m at a point now where I feel like I can print things, and while they aren’t the best quality yet, that will change in the future, with more and more tweaking. I’m looking forward to sharing tips & tricks at the Milwaukee 3D Printing Meetup happening July 1st, 2012, and 3D Printing Camp on July 21st, 2012. If you’re at all interested in this stuff, either event (or both!) would be a great introduction.

Categories
Uncategorized

MKE3DP – 3D Printer Fans Unite!

MKE3DP

As you may know, I finished my RepRap recently. But here’s the thing, you never really finish a RepRap. It’s a beast in need of endless tweaking. So yeah, it’s a never-ending project (if you want it to be) and I’m okay with that. I mean, once you get to the point that it works, you can start using it to upgrade itself. How many tools can do that!?

Of course you can actually make useful things, functional things, or just pretty things. There’s a lot a 3D Printer can do. I’ve only been at it for less than a year and I’ve still got a lot to learn.

So anyway, yeah, I’m really enjoying this 3D Printing stuff… so I figured, why not share it with others? So join us for the first Milwaukee 3D Printing Meetup! We’ll be meeting on Sunday, July 1st, 2012 at 1:00pm. We won’t be at our space because we’ve partnered with our friends at UWM for this one! Show up at UWM’s Kenilworth Square East Building, 3rd Floor; Room 368 on 1925 E. Kenilworth Place.

If you’ve got a 3D Printer, bring it, or just show up and learn about them. If things go well and there’s interest, maybe we’ll turn it into a regularly scheduled meeting.

(More info? It’s also on the Milwaukee Makerspace site and you can RSVP on Facebook if you want to see who else will be there.)

Categories
Uncategorized

Maker Business – I Heart Robotics

Plastic

In the spirit of my “Maker Business” posts (like The Real Costs and Lessons Learned) I’d like to point you at this post from I Heart Robotics titled Business Plan: 3D manufacturing. If you haven’t read it, go read it. Then come back here. I’ll wait.

Are you back? Good! Let’s go…

This is my favorite post of the week… and it’s only Thursday! For anyone wanting to get into a maker-related business, it’s a must-read.

The funny thing is, I’d seen one of these TriK Tripod Adapters for the Kinect before, because Mike printed it at Milwaukee Makerspace one day. (You could say I have an interest in various camera related mounting technology.) Yeah, that’s right, they guys who were selling this item also gave away the design for free to anyone who wanted it. Insane you say? The world I want to live in, I say…

This is an area I see open source hardware similar to open source software. Once a problem is solved, why not share the solution with everyone else, for free? You’re welcome to sell the software (or hardware) all you like, and letting other use it for their own use is a great side effect that costs you nothing. (Some could argue it costs you in potential revenue, but I won’t argue that right now.) It’s also worth noting that I Heart Robotics licenses the item with an Attribution – Non-Commercial – Share Alike license. For those unfamiliar with Creative Commons, a simple explanation would be that as long as you don’t make money by selling it, you can go nuts and make (and give away) as many of them as your 3D Printer can make.

This breakdown of costs is also worth studying.

TriK Tripod Adapter Costs 

 $0.384     8 grams Raw ABS Plastic
 $0.0182    1/4-20 Nut
 $0.222     Qty 4 Plastic thread forming screws 
 $0.124     2 x 1 1⁄4 x 3" Kraft Reverse Tuck Carton
 $0.015     2 x 2" White Laser Label
 $0.044     3 x 5" 2 Mil White Block Reclosable Poly Bag
~$3.75      NRE - Non-Reoccuring Engineering Costs
~$0.50      Labor - Push button, remove part, repeat
~$8.34      Printer operating cost

Total Cost $13.40/part

What can we learn from these numbers? Plenty! Some of these items are things you don’t really think about, like labor or equipment operating costs. For instance, I use a drill press in my basement to manufacture things. I don’t really add in the cost to run it for a few minutes per unit, but maybe I should. I also run a fan in my spray booth, and that uses electricity. The numbers might be negligible, but they do exist. (Oh, we also learn that Uline is awesome.) Update! Uline sucks. They helped fund an insurrection. I stopped using them years ago. See Also: refuseuline.com

Since I’ve been dealing with numbers like these in the past few months I’ve become a little more aware of people who complain about such things. I can see someone who owns their own 3D Printer saying “They want $20 for that!? It’s like 5 cents worth of plastic!” and while it may be just 5 cents worth of plastic (or less) there’s a lot of other costs involved. If you have the power to make one on your own, go for it! Either design one and make it, or in this case, download it and print it. I’ve learned that even if you carefully outline exactly how to do something and publish it on the Internet, there are still people who will (gladly) just pay you to do it all for them and then ship it to them, and for that I am grateful.

Categories
Uncategorized

iPhone Tripod Mount

iPhone Tripod Mount

Since the camera on the iPhone 4S is so good, more than one person has thought about mounting the iPhone on a tripod.

In fact, some guys did a Kickstarter campaign and got over $137,417 for the idea! And a bunch of other people designed things you could make on your 3D Printer to do the job.

The Glif

The problem with the Glif and most of these other phone holders is that they are designed to work with an uncased iPhone, and I tend to leave mine in the case all the time. I use an OtterBox case (It’s this one.) It’s grippy and rubbery, and since I wanted a tripod mount that would work with the case, I made my own. (Here’s a post that mentions an early version.)

iPhone Tripod Mount

This mount would probably work with almost any phone that uses a rubbery case, since it uses the grip of the rubber to its advantage to stay in place. You just gently tighten the wing nuts to hold the phone in place. There are nuts under the top piece of wood to prevent you from over-tightening.

iPhone Tripod Mount

Yeah, it’s basically two pieces of wood, two bolts, a few washers, nuts, and wing nuts. I may consider printing some knobs like I did here to replace the wing nuts. (And yeah, you’ll notice it’s the same screw method I used for my DIY Mouthpiece Puller.)

iPhone Tripod Mount

The bottom piece of wood has two small pilot holes to accommodate the two buttons on the side of the iPhone, so the buttons do not get depressed when in the mount.

iPhone Tripod Mount

The other tricky thing is how I mount the tripod plate to the bottom. I ended up getting a nut coupler, and then drilling a hole into the bottom piece of wood, and pretty much hammering in the nut coupler. It was too long so I had to hack saw it off to be flush with the bottom. Not pretty, but it does work.

Now that I’ve got this done, I should probably go back and do those test shots comparing the iPhone 4S camera to other cameras. :)